QuickFrames Quote


Need Just A Few Frames Quoted?

If you are working on a project requiring only a few frames and you know the basic requirements for how they will be used, just fill out the form at the bottom of this page. We’ll get a quote back to you within 24 hours!

For each framed opening, using the numbered images below- select the image that most closely matches where the opening will be located relative to the joists/beams and enter that into the Type column. While RTUs are shown in these images, they apply to all types of roof top equipment. If none of the images match your configuration, enter (0).

Roof Framing Configurations

If the framing will only support the duct openings and not the curbing, enter the letter (Y) in the Duct Only column. If the framing will support the curbing and equipment, enter the letter (N).

Specify the center-to-center joist/beam spans as shown by (A) in the image to the right.

When specifying the frame opening size (B), use the length of the opening running parallel to (running with) the joists or beams.

Frame Outline Image
Frame Type Duct Only Span (A) Opening (B) Weight Qty Equipment
#1
#2
#3
#4
#5

Select the type of roofing on this project:


Install After Roof Image


Have A Large Or Complex Project? Let Us Do The Take-offs For You!

The simplest way for us to provide you with a customized QuickFrames quotation is for you to allow us to do the take-offs directly from the engineering drawing set.

We have developed an extensive database of roof top equipment information, such as sizes, weights, opening dimensions, and structural requirements that allows us to select the optimal roof frames for your applications. All you need to do is to provide us with access to your drawing set and then let us go to work for you. You can also have complete confidence that we treat all drawing sets as proprietary information and we respect the importance of confidentiality for anything you share with us.

The easiest way for us to access your files is for you to provide us with an FTP address, login and password. Or, if the file set is small enough, you can also email it to us.

Upload Your Drawings (max: 10MB)